One to Four Head Extrusion Blow Molder for 10L Chemical Bottles

Chemical packaging punishes weak bottles. A 10 litre container filled with caustic or solvent needs a consistent wall at the shoulder and a neck finish that seals, and both come from a stable parison and a clamp that does not breathe during blow-up.

The MP80D is configured for that duty: 150 kN clamp on a 520 x 460 mm platen, an 80 mm screw feeding 90 kg/h of HDPE, and optional multi-layer die heads if a barrier structure is needed for solvent based products.

• Chemical container focus: Wall consistency at shoulder and base for 5L to 10L aggressive liquid packaging
• Multi-layer die head option: Flat, profile and multi-layer heads available where barrier properties are required
• 150 kN clamping: Parting line held firm through blow-up, so neck geometry and seal faces stay accurate
• PE, PP, PVC, PA materials: Covers the resin families used across detergent, agrochemical and solvent packaging
• Four heating zones plus head zones: Stable melt for a clean surface on coloured and filled compounds
• Automatic cycle with guards: Full enclosure with interlocks keeps operators clear during the blow and eject sequence

• 10L agrochemical and pesticide containers
• Detergent and disinfectant bottles
• Industrial solvent and cleaner containers
• Automotive fluid and antifreeze bottles
• Bleach and pool chemical packaging

A: Yes, with a multi-layer die head. A barrier layer such as PA or EVOH is co-extruded inside the HDPE wall, and the layer proportion is set through the head flow plates and verified by sectioning the first samples.

A: Most 10 litre chemical containers run 2 to 3 mm depending on drop test requirements and the filling temperature. We tune it on your mould during the factory trial and record the setting in the recipe.

A: Neck geometry comes from the mould, but machine stability decides whether it is repeatable. The 150 kN clamp and stiff 8.2 tonne frame keep the neck round, which is the usual cause of leaking caps on chemical bottles.

The machine is shipped with anti-rust protection on all machined surfaces in an export wooden case with steel reinforcement and moisture barrier film. Delivery is 25 to 35 working days after deposit. CE marking, ISO9001:2008 production control, English documentation, a 12 month warranty and remote commissioning support are included.