|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | 5L-10L | Applicable Material: | HDPE LDPE |
|---|---|---|---|
| Auto Defleshing System: | Yes | Parison System: | Yes |
| Products: | Plastic Special Shape Container | Mode: | MP80D |
| High Light: | Special Shape Container HDPE Molding Machine,5L HDPE Bottle Moulding Machine,Plastic Container HDPE Blowing Machine |
||
HDPE Blow Moulding Machine for special shape container
Introduction:
MP80D is specifically designed for making bottles from 10ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP80D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP80D is updated to be one of the most reliable and popular model in the world.
Meet CE standard for European market.
European machine qualiy with China machine price
How to judge which direction is right when machine packed with box.
1. in general speaking, there will be sticked one paper written down “ATTENTION: FORKLIFT HERE”
2. in case the paper falling down or missing, you can see one hold in the box, this direction is right direction to lift machine
Now we introduce how to use hoist to lift machine exactly:
In the machine frame we install 4 hook, you must put steel line into the hook then can lift machine. Don’t put the line in the other place, special put line into lifting device.
Please seen figure, in order to see clearly, we remove sheet.
Machine specification:
| MP80D | ||
| Material | PE,PP,(PVC,PA)OPTION | |
| Max container capacity | L | 10 |
| Number of die | set | 1,2,3,4,6,8 |
| machine Dimension(L×W×H) | M | 3.82×2.54×2.5 |
| Total weight | ton | 4.5 |
| Clamping force | kn | 120 |
| Platen opening stroks | mm | 220-620 |
| Stroke of mould board | mm | 400 |
| Platen size | mm | 420×520 |
| Max mould size(W×H) | mm | 480×500 |
| Mould thinkness | mm | 225-300 |
| Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 85 |
| Number of heating zone | zone | 4 |
| Extruder heating power | kw | 18.5 |
| Power of screw-bar machine | kw | 0.22 |
| Extruder driving power | kw | 30 |
| Number of heating zone | zone | 2 |
| Power of die heating | kw | 13.5 |
| Max die-pin diameter | mm | 180 |
| General power of machine | kw | 73.7 |
| Power of the electric motor of oil pump | kw | 9.5 |
| Air pressure | Mpa | 0.6-0.8 |
| Average energy consumption | kw | 35 |
| Using quantity of compression air | m3/min | 1.5-2.5 |
| Using quantity of cooling water | m3/min | 3.0-5.0 |
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
