|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | 5L | Applicable Material: | PVC |
|---|---|---|---|
| Auto Defleshing System: | Yes | Parison System: | Yes |
| Products: | Plastic Water Container | Mode: | MP80D |
| Highlight: | 5L Water Container Blow Moulding Machine,PVC HDPE Blow Moulding Machine,MP80D Plastic Blow Moulding Machine |
||
Blow Moulding Machine for PVC 5 L water container
Introduction:
MP80D is specifically designed for making bottles from 10ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP80D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP80D is updated to be one of the most reliable and popular model in the world.
Meet CE standard for European market.
European machine qualiy with China machine price
Installation of machine
2.1.1 The installation and operation surrounding of this machine: surrounding temperature+5ºC -- +40ºC; humidity 30-95%; altitude less than1500m.
2.1.2 The installation base of the machine should have some compressive strength. If it is installed on concrete base, the depth of base depends on the geologic condition. However, it is more than 250mm.
2.1.3 In order to make maintenance and management easier, enough space around the machine should be spared. Usually 1-1.5 meters should be spared around. If the machine is arranged with other machines abreast, about 2 meters should be spared between them.
Machine specification:
| MP80D | ||
| Material | PE,PP,(PVC,PA)OPTION | |
| Max container capacity | L | 10 |
| Number of die | set | 1,2,3,4,6,8 |
| machine Dimension(L×W×H) | M | 3.82×2.54×2.5 |
| Total weight | ton | 4.5 |
| Clamping force | kn | 120 |
| Platen opening stroks | mm | 220-620 |
| Stroke of mould board | mm | 400 |
| Platen size | mm | 420×520 |
| Max mould size(W×H) | mm | 480×500 |
| Mould thinkness | mm | 225-300 |
| Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 85 |
| Number of heating zone | zone | 4 |
| Extruder heating power | kw | 18.5 |
| Power of screw-bar machine | kw | 0.22 |
| Extruder driving power | kw | 30 |
| Number of heating zone | zone | 2 |
| Power of die heating | kw | 13.5 |
| Max die-pin diameter | mm | 180 |
| General power of machine | kw | 73.7 |
| Power of the electric motor of oil pump | kw | 9.5 |
| Air pressure | Mpa | 0.6-0.8 |
| Average energy consumption | kw | 35 |
| Using quantity of compression air | m3/min | 1.5-2.5 |
| Using quantity of cooling water | m3/min | 3.0-5.0 |
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
