|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | 1500Ml-5L | Applicable Material: | HDPE LDPE PP PETG PVC PC PA EVOH |
|---|---|---|---|
| Product: | Biocide Bottle | Multi-laye: | 1-6 Layers |
| Mahine Type: | Single Station Multi Head | Feature: | High Barrier |
| Highlight: | Biocide Bottle Blow Moulding Machine,High Barrier Blow Moulding Machine,Multi Layers Automatic Blow Molding Machine |
||
Multi- layers High Barrier Biocide Bottle Blow Moulding Machine
Introduction:
MP90FS IML is specifically designed for making bottles from 600ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP90FS IML has single stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP90FS IML is updated to be one of the most reliable and popular model in the world.
Adjusting of placing rack
If head central line and chamber central line are not in parallel and superposition after the above mentioned methods. It is necessary to adjust placing rack as follow:
1) If head central line and chamber central line are still not in parallel and superposition, adjust mould rack position until its superposition. After head central line and chamber central line are in superposition, operate this machine manually until rack reaches down stop position. Then adjust position of blow pin.
2) After head central line and chamber central line are in superposition and blow pin is well adjusted and locked, then return all approach switches to its original position where approach switches can induce when placing rack moves to its limit up and down.
| Parameters | MP90FS |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6,8 |
| Machine Dimension(LxWxH) | 5x5.9x3.1m |
| Total weight | 12ton |
| Clamping force | 350kN |
| Platen openning stokes | 240-560mm |
| Toggle stokes | 1150mm |
| Max mould size(WxH) | 1100x430mm |
| Screw diameter | 90mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 150kg/h |
| Screw heating zone | 4 zone |
| Screw heating power | 16.5kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 45kw |
| Die head heating zone | 16 zone |
| Power of die heating | 21kw |
| Total power of machine | 160kw |
| Power of oil pump motor | 31kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 80kw |
| Consumption compression air | 1.5m³/min |
| Consumption cooling water | 150L/min |
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
