|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | 100Ml-10L | Applicable Material: | HDPE LDPE PP PETG PVC PC PA EVOH |
|---|---|---|---|
| Product: | Pesticide Bottle | Multi-laye: | Multi- Layers |
| Mahine Type: | Toggle Type,High Speed | Feature: | High Barrier |
| High Light: | Multi Layers Bottle Blow Moulding Machine,Pesticide Bottle Blow Molding Machine,Toggle Automatic Blow Moulding Machine |
||
Multi- layers High Barrier Pesticide Bottle Blow Moulding Machine
Introduction:
MP90FS IML is specifically designed for making bottles from 600ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP90FS IML has single stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP90FS IML is updated to be one of the most reliable and popular model in the world.
Adjusting of blow pin
1) If blowing mouth departs from bottle mouth, loose fixing screw of blow pin moving, rotate hand wheel related and adjust blow pin moving in all directions until blowing mouth centralizes with bottle mouth. And then tighten screw and fix blow pin rack.
2 Adjust the adjusting cover at the top of blow pin oil cylinder piston bar to its proper position and make blowing mouth cutting ring just touch mould cutting mouth. The best position is where it can cut gate but not strike mould mouth.
3) Once blowing procedure finishs, mould opens and blowing mouth ascends. After ascending, induction bar must be connected with approach switch ( If not connected, adjust approach switch), otherwise, next action( placing rack action) will not contin
| Parameters | MP90FS |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6,8 |
| Machine Dimension(LxWxH) | 5x5.9x3.1m |
| Total weight | 12ton |
| Clamping force | 350kN |
| Platen openning stokes | 240-560mm |
| Toggle stokes | 1150mm |
| Max mould size(WxH) | 1100x430mm |
| Screw diameter | 90mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 150kg/h |
| Screw heating zone | 4 zone |
| Screw heating power | 16.5kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 45kw |
| Die head heating zone | 16 zone |
| Power of die heating | 21kw |
| Total power of machine | 160kw |
| Power of oil pump motor | 31kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 80kw |
| Consumption compression air | 1.5m³/min |
| Consumption cooling water | 150L/min |
Contact Person: Levi.Li
Tel: 86-13396686968
