|
Product Details:
Payment & Shipping Terms:
|
| Max Production Capacity:: | 900pcs/hour | Defleshing System: | Yes |
|---|---|---|---|
| Product: | Medicine And Biochemistry Bottle | IML System: | Yes |
| Fully Automatic: | Yes | ||
| High Light: | extrusion blow molding machine,blow molding device |
||
Fully Automatic Blow Molding Machiner with defleshing and IML MP80FS-4 for medicine and biochemistry bottle
Model number: MP80FS&IML
Brief introduction:
Hydraulic system design extusion blow molding machine MP80 is suitable for Producing Medium Size Bottles up to 10L of Various Materials, and Equipped with Single Die Head, Double Die Heads, Three Die Heads, Four Die Heads, Six Die heads.
Adopt four leaders point support structure, it can accept heavy moulds. With parison control system ,it is especially to make bottles below 10 liter, like toys, auto parts....
Advantage:
1. Most important for a good EBM machine is the action system and the extrusion system.
we'r using powerful hydraulic system design with imported valve and pump for stable action
Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs continiously,long life.
2. Heavy and stong structure,make sure machine works more faster and stable.
3. Special protection for the machine and people
Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.
Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.
4. Special care for different countries.
we offer some special design for different countries,in order to matching best performance.
5. Easy die head dis-assemble and assemble
6. Defleshing function included
Machine specification:
| Parameters | MP80FS |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6 |
| Machine Dimension(LxWxH) | 3.7x4.7x2.9m |
| Total weight | 10.5ton |
| Clamping force | 200kN |
| Platen openning stokes | 240-560mm |
| Toggle stokes | 800mm |
| Max mould size(WxH) | 750x420mm |
| Screw diameter | 80mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 108kg/h |
| Screw heating zone | 4 zone |
| Screw heating power | 15.6kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 30kw |
| Die head heating zone | 12 zone |
| Power of die heating | 17kw |
| Total power of machine | 89kw |
| Power of oil pump motor | 31kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 60kw |
| Consumption compression air | 1.5m³/min |
| Consumption cooling water | 60L/min |
Machine specification:
Defleshing system type:Push on top and bottom with air cooling system.
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
