|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | Customize Size | Defleshing System: | Yes |
|---|---|---|---|
| VIew Strip: | Yes | Fast Cycle: | Yes |
| PLC: | Techmation | Type: | Toggle Clamping System |
| High Light: | plastic bottle blow molding machine,high speed blow molding machine |
||
Double station extrusion blow moulding machine max production volume 5L model MP70FD
Brief introduction
MP70FD Adopt hydraulic system drive,linear transducer movement for carriage up and down,fully automatic lubrication system with self-detector function.This model is popular use for small products below 5L.
Advantage:
1. Most important for a good EBM machine is the action system and the extrusion system.
we'r using powerful hydraulic system design with imported valve and pump for stable action
Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs continiously,long life
2. Heavy and stong structure,make sure machine works more faster and stable.
3. Special protection for the machine and people
Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.
Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.
4. Special care for different countries.
we offer some special design for different countries,in order to matching best performance.
5. Easy die head dis-assemble and assemble
6. Defleshing function included
Machine specification:
| Parameters | MP70FD |
| Material | PE PP PVC PA… |
| Max container capacity | 5L |
| Number of die | 1,2,3,4,6 |
| Machine Dimension(LxWxH) | 3.6x2.2x2.36m |
| Total weight | 5.5ton |
| Clamping force | 90kN |
| Platen openning stokes | 180-480mm |
| Toggle stokes | 450mm |
| Max mould size(WxH) | 430x400mm |
| Screw diameter | 70mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 70kg/h |
| Screw heating zone | 3 zone |
| Screw heating power | 14.1kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 18.5kw |
| Die head heating zone | 3 zone |
| Power of die heating | 6.5kw |
| Total power of machine | 49.14kw |
| Power of oil pump motor | 9.5kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 28kw |
| Consumption compression air | 1.2m³/min |
| Consumption cooling water | 40L/min |
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
