|
Product Details:
Payment & Shipping Terms:
|
| Prodcut Capacity: | Customize Size | Quantity: | 6 Pcs One Mould |
|---|---|---|---|
| Product: | Ocean Balls Toy | Station: | Double |
| Die Head: | 2 Heads | Type: | Toggle Clamping System |
| Highlight: | Toggle Clamping System Blow Molding Machine,Double Station Custom Blow Molding Machine,Ocean Balls Extrusion Blow Molding Equipment |
||
China Meper Toggle Clamping System Custom Blow Molding Machine MP70FD for ocean balls toy
Brief introduction
MP70FD Adopt hydraulic system drive,linear transducer movement for carriage up and down,fully automatic lubrication system with self-detector function.This model is popular use for small products below 5L.
Advantage:
1. Most important for a good EBM machine is the action system and the extrusion system.
2. Heavy and stong structure,make sure machine works more faster and stable.
3. Special protection for the machine and people
4. High quality pneumatic parts are imported from Europe or Japan. Fast feedback solenoid valve (from Germany) is adopted in high-pressure blowing. It ensures the second blow time accurate and controllable.
5. Centralized heating makes even, stable effect, and reduces power consumption mostly.
6. Close-loop heating control system with cor responsive high accurate digital meter, and imported adjustable high power frequency controller, make sure stable heating, energy saving and not to be affected by fluctuated voltage. IR lamp which is most efficient for PET heating, is fully considered for lower power consumption and higher production efficiency.
Machine specification:
| Parameters | MP70FD |
| Material | PE PP PVC PA… |
| Max container capacity | 5L |
| Number of die | 1,2,3,4,6 |
| Machine Dimension(LxWxH) | 3.6x2.2x2.36m |
| Total weight | 5.5ton |
| Clamping force | 90kN |
| Platen openning stokes | 180-480mm |
| Toggle stokes | 450mm |
| Max mould size(WxH) | 430x400mm |
| Screw diameter | 70mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 70kg/h |
| Screw heating zone | 3 zone |
| Screw heating power | 14.1kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 18.5kw |
| Die head heating zone | 3 zone |
| Power of die heating | 6.5kw |
| Total power of machine | 49.14kw |
| Power of oil pump motor | 9.5kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 28kw |
| Consumption compression air | 1.2m³/min |
| Consumption cooling water | 40L/min |
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
