|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | 50ML-5L | Applicable Material: | HDPE LDPE PP PETG PVC PC PA EVOH EPET |
|---|---|---|---|
| Product: | Plastic Shampoo Bottle | Station: | Single Or Double |
| Machine Type: | D Type-Tie Bar Type | Speed: | High Speed |
| High Light: | D Tie Bar Blow Molding Machine,50ML Two Colors Blow Molding Machine,Shampoo Bottle Blow Molding Machine |
||
High Speed Two Colors Blow Molding Machine MP70D-3 For Plastic Shampoo Bottle
Introduction:
MP70D is specifically designed for making bottles from 50ml up to maximum 5L. It is hydraulic driven with accrate eletrical control system. MP70D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP70D is updated to be one of the most reliable and popular model in the world.
| MP70D Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 3600mm |
| ||
| Width: | 2200mm | |||
| Height | 2360mm | |||
| Key Data | MP70D | |||
| mm | ||||
| Linear mould stroke | A | 450 | ||
| Mould Width | B | 430 | ||
| Mould Length | C | 350 | ||
| Mould Thickness | D | 190 | ||
| Opening Stroke | E | 290 | ||
| Platen daylight | D+E | 480 | ||
| Clamping Force | 75kN | |||
| Dry Cycle | 7 sec. | |||
| Centre Distance | 2x2 fold | 160 | ||
| 2x3 fold | 120 | |||
| 2x4 fold | 100 | |||
| 2x6 fold | 60 | |||
| Extruder | φ70 | φ75 | φ80 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 18.5 | 22 | 30 |
| Extruder Moter Power | kW | 18.5 | 22 | 30 |
| Srew Heating Power | kW | 12.7 | 14.4 | 15.85 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 9.5 | 9.5 | 9.5 |
| Total Power of Machine | kW | 49.14 | 54.34 | 63.79 |
| Air Requirement approx | m3/min | 1.2 | 1.2 | 1.2 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 40 | 40 | 40 |
Lifting device and lifting
The major function of lifting device is to adjust the distance from head bottom to mould top.
Platform of extrusion machine can adjust up and down by shaking the handle in the back and transmission device of turbo wheel & turbo bar.
It is made up of turbo wheel, turbo bar, line tooth taper gear, transmission axle and shaking handle.
The major functions of lifting are:
1) Voiding accumulation of running materials in mould bottle mouth;
2) Preventing material pipe from touching mould;
3) Helping cutter to cut material pipe smoothly.
Two oil cylinders are located in platform front. They lift the whole platform of extrusion machine and lifting was realized. It is mainly made up of lifting oil cylinder.
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
