|
Product Details:
Payment & Shipping Terms:
|
| Container Capacity: | 5ml-2L | Applicable Material: | PE,PP |
|---|---|---|---|
| Product: | Plastic Lanern Toys | Multi-cavity: | 1-4 Layer |
| PLC: | Techmation | Fully Automatic: | Yes |
| Highlight: | Fully Automatic Blow Molding Machine,5ml Blow Molding Machine,Plastic Lantern Toys Blow Molding Machine |
||
China Meper Blow Molding Machine Fully Automatic MP55D-1 For Plastic Lanern Toys
Introduction:
MP55D is specifically designed for making bottles from 5ml up to maximum 1L. It is hydraulic driven with accrate eletrical control system. MP55D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP55D is updated to be one of the most reliable and popular model in the world.
The function is to cut material pipe evenly and smoothly.
Hot cutter blade should be heated with low voltage and strong current. The temperature of blade is controlled by blade tansformer. The blade cuts material pipe by cylinder pushing force. Hot cutter is suitable for cutting all kinds of materials. Sharpness and temperature of blade should be kept all the time.
| PARAMETERS | MP55D-1 φ50 |
| SPECIFICATIONS | |
| material | PETG |
| MAX container capacity L | 0.2 |
| number of die Set | 1 |
| machine dimension(L×W×H) M | 2.87×2.14×2.28 |
| total weight Ton | 3.5 |
| CLAMPING | |
| clamping force KN | 30 |
| platen opening strokes mm | 120-350 |
| toggle stroke mm | 230 |
| Max mould size(W×H) mm | 360×300 |
| EXTRUDER UNIT | |
| screw diameter mm | 50 |
| screw L/D ratio L/D | 30 |
| (HDPE)plasticizing capacity kg/h | 30 |
| screw heating zone zone | 4 |
| screw heating power kw | 7 |
| fan power kw | 0.28 |
| extruder driving power kw | 11 |
| DIE HEAD | |
| die head heating zone zone | 3 |
| power of die heating kw | 4.5 |
| ENERGY-CONSUMPTION | |
| power of the electric motor kw | 7.5 |
| air pressure Mpa | 0.6-0.8 |
| total power of machine kw | 30.28 |
| average energy consumption kw | 15 |
| compression air consumption m3/min | 1 |
| cooling water consumption L/minv | 30 |
The main function of Safety door is that preventing operator from entering into machine and putting hand into mould when mould platen is running.
Safety door installs obstructing shaft, limited sensor, stroke switch, which prevent people from entering into machine. limited sensor belongs to one kind of electric safe. When you close the door, it will contact sensor, then the clamping system works; when door is open, sensor doesn’t work, electric diagram is in a safe situation. stroke switch is also one kind of electric safe, when stroke switch is in a safe situation, if operator enter into door, then machine will give a alarm.
Note: Don’t make limited sensor short circuit then operate, stroke switch must be in a safe situation, otherwise, which will cause injury.
Standard Features:
Auto Lubrication
Water Cooled Modular Blow Pin
Hot Wire Cutting
Positioning Hole For Quick Mold Change
Adjustable Die head
Linear Transducer
FRL(Filter Regulator Lubricator) for Pneumatic
Proportional Hydraulic System fro better control
Swing and Adjustable Extrusion Platform
Contact Person: Levi.Li
Tel: 86-13396686968
Fax: 86-574-81688011
